Top E cigarette ltd
12 new street
-2 CE4 clearomizers
-1 USB charging cable
-1 USB cable
- 3 PIN wall adapter
-1 Instruction manual
PLASTIC BOTTLE IS NOT INCLUDED !!
How to use e-cigarette eGo-CE4 and how to fill the e-liquid to the eGo CE4 Plug cartomizer(eGo CE4+ clearomizer)
The eGo-CE4 e-cigarette is new generation of eGo tank e-cigarette with new technology of 1.6ml transparent CE4 Plug cartomizer(eGo CE4+ Clearomizer). CE4 Plus cartomizer is the latest Clearomizer designed to work with eGo Series batteries:
1) Easy to fill the e-liquid. Just take off the CE4 cartomizer inhaler tip, fill the e-liquid, and then screw back the inhaler tip onto the eGo CE4 cartomizer.
2) Huge capacity, eGo ce4 cartomizer can hold about 1.6ml of E-liquid.
3) Fits nicely on an eGo giving a clean finished look.
4) With scale on the eGo CE4 transparent clearomizer, you can see how much nicotine you inhaled.
5) Longer wicks for more consistent flow of e-liquid to the coil in any position
6) No burning. Very large vapor.
7) Large capacity batteries, the average to heavy user can get 6 to 8 hours of use from a fully eGo charged battery (MEGA battery is 1100mAh, enables over 14 hours).
How to use eGo CE4 plug e-cigarette.
a. Fill e-liquid to the eGo CE4 cartomizer:
Step 1: Take out the e-liquid bottle lid;
Step 2: Cut off the top of e-liquid bottle; NOT NEEDED WITH OUR DEKANG SILVER LABEL
Step 3: Unscrew the inhaler tip from the CE4 cartomizer
Step 4: .
Using an e-liquid bottle or syringe, fill the CE4 cartomizer by inserting e-liquid down the side wall (Do not fill e-liquid in the center hole, that is for air flow).
Step 5: Screw the inhaler tip back onto the CE4 clearomiser (do not screw too tightly)
b. Screw the eGo CE4+ Cartomizer with the eGo battery:
Screw and connect the eGo CE4 cartomizer with the eGo battery, then they will be stand-by state.
* The eGo ce4 e-cigarette works only when you press the eGo LED button. Press the LED button and inhale at the same time.
f. Charge the eGo-C battery:
You just screw the eGo battery with the USB charger, then plug it into the PC or AC-USB Adapter. 1. the first charge should be kept for 8 hours, even if the LED light turns green. 2. Use for 20 minutes., 3. Charge the battery for another 1 hour. Your eGo battery is ready for normal using now. The normal charging time should be kept for 3 hours( even if the LED light turns green).