Contact us
Top E cigarette ltd
12 new street
Waterford
IRELAND
PHONE 051323438
VOOPOO DRAG 2 VAPE KIT Ireland
VOOPOO DRAG 2 VAPE KIT in Ireland
Specification
|
Basic Information |
Brand: voopoo |
|---|---|
|
Dimensions and Weight |
Product weight: 0.1600 kg Product size: 5.00 x 3.00 x 9.00 cm / 1.97 x 1.18 x 3.54 inches Package weight: 0.1800 kg Package size: 6.00 x 6.00 x 12.00 cm / 2.36 x 2.36 x 4.72 inches |
|
Package Contents |
Package Contents: 1 x VOOPOO Drag2 Mod, 1 x Uforce T2 Tank, 1 x Micro USB Cable, 1 x English User Manual |
FIT your security - Innovative GENE.FIT chip inside
15Months Spent in R&D
11MData Mining of GENE Chips
161Tanks Tested
Apart from the innovation in its brain, GENE.FIT chip is secured by a V0 class fireproofing bridge to block dust, liquid or burnout.
Introducing FIT
Our vision has always been to create the device that is of high performance, long endurance and best protection for vapors. FIT is a mode that can protect tanks to the most with its intelligent matches of FIT 1/2/3.
FIT 1: Battery set
Features of FIT
Protect sub-ohm tanks from burnout (*Under normal and right operating conditions) Intelligent matches with tanks
*UFORCE tanks recommended for FIT mode. It does not apply to RDA, RTA or RDTA.
FIT your hand
DRAG 2 employs new designs to
precisely fit your hands with the elegantly
rounded corners and shaping.
FIT your taste
Specular finishing + multiple resin plates
Island
Flame
Aurora
Scarlet
Fire cloud
Puzzle
Dawn
Ink
DRAG 2 is employed with solid specular finishing, with multiple new resin plates.
FIT in travels1/4 lighter than DRAG
DRAG (mod): 203g (without battery)
DRAG 2 (mod): 158g (without battery)
Following the same design and solid quality of DRAG, DRAG 2 mod is slimmer and 1/4 lighter than its predecessor, making it more friendly for everyday use. The biggest optimization of this mod, comes internally.
FIT your needs - New UFORCE T2 tank matched
- Top Filling
- U2/U4/U6/U8/N1
N2/N3/R2/D4
Coils Compatible - Bottom Airflow
UFORCE U2
Dual coils
Strong flavor structure
Resistance: 0.4Ω
Power: 40-80W
Best: 55-65W
UFORCE N3
Triple mesh coils
High acceleration power
Always keep the full and original flavor
Resistance: 0.2Ω
Power: 65-100W
Best: 75-85W
UFORCE N3 with triple mesh coils
With exotic appearance and exquisite structure, the idea of UFORCE T2 comes from the mechanical design of the TRANSFORMER. DRAG 2 kit will keep the original flavor with U2 and N3 coils.
Core description
Compatible with all UFORCE coils :
The tank is compatible with all of the glass tubes（2ml/3.5ml/5ml/5.5ml/8ml）.
FIT 177W output
From 157W to 177W, it is never the highest number that accounts
With the FIT mode of DRAG 2
177W allows vapors to explore more than the 20W increase
90mmDRAG
Dimensions: 90*54*24mm
Weight: 204(±2)g
Battery: 2*18650
Max Range: 157W
88.3mmDRAG 2
Dimensions: 88.3*51*26.5mm
Weight: 158(±2)g
Battery: 2*18650
Max Range: 177W
Eight security protections
Battery Reverse Protection
With battery reverse protection, the mod will be protected from breakdown.
Switch Timeout Protection
Intelligent overtime protection will avoid atomizer's coil and cotton burning.
Over-temperature Protection
TC mode assures the mod and battery work properly within safe temperature range.
Output Over-current Protection
To Intelligently detect output current, and close the output current when the current exceeds the highest limit.
Overcharge Protection
With dedicated lithium battery protection components, the battery will be protected against battery overcharge and damage.
Over discharge Protection
With dedicated lithium battery protection components, the battery will be protected against battery discharge and harm.
Short-circuit Protection
When the short-circuit is detected, the mod will protect the battery by preventing the circuit returning.
Support Balance charge with different brand battery
With dedicated firmware to detect internal resistance of battery, the battery will be controlled in a steady balanced charging condition.
E-liquid filling steps
It can effectively prevent e-juice leakage by pushing the top cap and filling in e-liquid, which is more convenient and clean
- Hold the atomizer with your left hand push the top cap with your right hand and move it
- Add e-liquid through the slot,and pay attention to check how much oil is filled in the tank (suggest not lower than the MIN line)
- Gently push back the top cap,then let the atomizer stands for 5 minutes to get the organic cotton completely saturated
Packing list (TPD)
DRAG 2 177W x 1
UFORCE T2(2ml) x 1
UFORCE U2(pre-installed) x 1
UFORCE N3(included) x 1
Glass Tube(2ml) x 1
Sealing O-Ring x 7
USB Cable x 1
GENE Chip Card x 1
User Manual x 2
Warranty Card x 1
