Top E cigarette ltd
12 new street
The STNG MTL RDA is simple and compact in appearance. Bottom feeding is adopted to make juice feeding much easier, since MTL drip tips are basically all narrow in shape which makes direct dripping from drip tip impossible. But you can still pull off the top cap to do drips if you are more of a dripper person, just replace the squonk pin with the solid pin from the accessory bag.
The spring-loaded post clamps are T-shaped to give convenient mounting for different coil directions. No need to remove the screws when installing coil, just loosening the screws a little will do. The coil is secured by top mounted Phillip screws on two sides, positioned right above the air supply holes.
On entering the single-sided air inlet, the air is pulled into the center of the deck bottom and redirected into two air channels that are right underneath the coil spot, supplying double airflows right onto the coil. Such air splitting system provides soft and optimal vaporization.
The STNG MTL RDA features a droplet shaped air control design on its top cap. This amazing and classic design allows users to set their favorite air flow as freely as possible. The droplet air inlet resides on only one side of the top cap, so do put that side onto the deck side with air hole on.